Buttons and Indicator Light

Find the button actions and status-light patterns for power, pairing, privacy, and charging.

By ODYSS MKT 1 min read

Button actions

Function Operation
Exit Ship Mode Press the button for one second.
Re-pair the device Press and hold the button for five seconds.
Enter Privacy Mode While in Sensing Mode, press the button once.
Exit Privacy Mode While in Privacy Mode, press the button once.
Factory reset Press the button five times in quick succession.
Power on While the device is powered off, press the button for one second.
Power off Press and hold the button for 12 seconds.

Charging indicators

Light Meaning
Solid green The battery is nearly full, above 95%.
Solid orange The battery level is between 20% and 95%.
Solid red The battery level is below 20%.

Device status indicators

Light Meaning
Slow flashing white Low-power detection is in progress.
Slow flashing green High-power food detection is in progress.
Solid orange The device is being restored to factory settings.
Rapid flashing red The device is being located.

Bluetooth pairing indicators

Light Meaning
Slow flashing blue Searching for a Bluetooth connection.
Rapid flashing blue Pairing mode is active and the device is waiting for a new connection.
Solid green for two seconds Bluetooth connected successfully.

Privacy Mode

Use the Function Button or the ODYSS App to enter or exit Privacy Mode. If you cannot confirm that capture has stopped in a sensitive setting, stop using the device and contact support.

ODYSS MKT

Written by the Odyss Life team.

Tagged: accuracy-privacy-data app-connectivity battery-charging
Share:

You may also like